Flex-Seal Technical Information - Sealing Systems Incorporated

Products

Flex-Seal Technical Information

The Problem
The Solution
General Information
Requirements
Specifications
Installation
Prepping/Cleaning Substrate
Equipment
Technical Information
Notice


Property	Measuring Condition	Flex-Seal Utility Sealant®	Primer
Weight Solid Content Hardness (Durometer) Elongation (at break) Vacuum Tensile Strength Adhesive Strength Water Absorption Tear Resistance Weatherability Temp. Service Range	ASTE-E 201 By Volume ASTM-D2240 ASTM-D 412 ASTM-C1244 ASTM-D 412 ASTM-D 903 ASTM-D 570 ASTM-D1004 ASTM-D822 500hrs. Fed Std 141meth 6223	9.5# per gal. 91% 75 800% 2 min. @ 10 in. 1,150 p.s.i. 175 lb. l/in. .05% by weight 155 lb. 1/in. Slight color change -65 to 250F	9.4#per gal. 92.2% 85-90 400% 3200 p.s.i. 400 lb. l/in. .03% by weight 210 lb. l/in. Loss of gloss -65 to 250F


Calcium Chloride (Road Salt) 1% Detergent Solution Chlorinated Pool Water Anti-Freeze Motor Pool Hydraulic Brake Fluid Gasoline Hydrogen Sulfide Sulfuric Acid (20% - PH1) Sodium Hydroxide (5%)	No Effect No Effect No Effect No Effect Stained Slight Bleaching Slight Swelling No Effect No Effect No Effect
DISCLAIMER: This technical data information and recommendations offered are based on test results and findings we believe to be reliable and complete. Flex-Seal Utility Sealant® is packaged in a kit weighing just 9 1/2 pounds. A kit will cover approximately 12 vertical inches on a 27" I.D. structure.