No Flow - Sealing Systems Incorporated

Products

No Flow

One of the most important problems facing the 21st century is water conservation. The water and sewer industry will be called upon to find new solutions to old problems to insure that water is treated and used efficiently.

During rainy weather, an average manhole contributes from 3,000 to 12, 000 gallons per day of rain water, to, the treatment systems.

No Flow

The NO FLOW IN FLOW dish is made to requirements from virtually indestructible material to offer a simple to install, long lasting product that eliminates sheet flow of rain water into the sanitary sewer system. Added advantages are the elimination of debris and dirt and reduction of manhole odors and manhole cover rattle noise.

BENEFITS

5 year warranty on the body of the in flow dish. ( .150 Material Thickness )

10 year warranty on the body of the in flow dish. ( .187 Material Thickness )

Ventilation by valve or vent hole.

Manufactured of ultra high density, high molecular weight polyethylene. (Marlex HXM 50100)

Brittleness temperature to a -180° Farenheit.

CUSTOMER BENEFITS

An excellent balance of stress cracking resistance, stiffness and melt strength make this resin an ideal candidate for large blow molded items and thermoformed parts.

This resin has... Good melt Strength...and produces molded parts with excellent stress cracking resistance, good rigidity, excellent impact strength - even at low temperatures.

PROPERTIES
Normal Physical Properties of Marlex HXM 50100

		ENGLISH		METRIC
Property	ASTM	UNITS	VALUE	UNITS	VALUE
Density	D1505	lbs/ft3	59.4	g/cc	0.950
ESCR, Condition A, F 50	D1693	h	800	h	800
Tensile Strength 2" (50.8mm) per min	D1638 Type IV	psi	3800	MPa	6.1
Brittleness Temperature	D746	of	<-180	oc	<-118